Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen that allows for a write-to-write experience, even while you are abroad. This is because of the unique design of the pen. It has two tanks, one smaller than the other, that house the e juice and charged batteries. When the user wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it’ll be vaporized. He simply turns on the pen and writes as though he is writing under a black mirror.
One of the greatest attributes of the Smok Pen is its capability to charge while it is on your desk. This is due to the coils on the Smok Pen were created in a way to help keep the e juice from dripping onto the table or somewhere else. This is because of the 0.3-ohm coil that’s placed in the Smok Pen. The 0.3-ohm coil ensures that even the slightest of air currents will not affect the writing process. Simply because the electronic circuitry has protection built in so that it will never be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that comes with it. Since the electronic circuitry has a safety barrier built in, because of this there is absolutely no risk involved when charging these devices through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, which is ideal for all pens that use a couple of batteries.
In order to keep the Smok Pen working for an extended time frame it is important that you don’t overcharge the battery. Overcharging the battery will certainly reduce the voltage that is available and may eventually result in these devices malfunctioning. Overcharging the Smok Pen may also affect the vaporizing process. If you feel that your battery isn’t getting the vapor it should, remove the pen from the energy source and let it cool down for a few minutes.
The fire button on the Smok Pen is situated at the bottom right corner of the device. The fire button has an orange light, which indicates that it is on. You can press this button to activate the electronic heating element which will permit you to vaporize the oil. When you have done so you can take away the coil from the holder and stick it in to the holder and place the Smok Pen into the airflow chamber, that will cause the heating element to start heating up and burning off the wick.
When the coil is removed from the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder plus they get heated from the airflow. After they get hot they start to turn blue, that is the indication that it is ready for the pen’s battery. Make sure that you place your sub-ohm into the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery into the pen, you must make sure that you have disconnected all of the leads. Then you need to take out the Smok Pen’s cap and locate the leak or drip tip. You must clean this with a little cotton bud, to be able to eliminate the leak. Then reattach the cap back to the Smok Pen and you will be ready to place the battery in to the pen.
The final portion of the construction process may be the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate lets you charge your e-juice through your computer, so long as you have an adapter for USB connection. I really like this part since it allows me to charge my entire kit at once without worrying about Juul Pods running out of power or constantly running out of e-juice.